What does F 05 mean on a Hotpoint washing machine?

What does F 05 mean on a Hotpoint washing machine?

Waste pipe blockage or pump
F05 — Waste pipe blockage or pump issue. Issue: Washing Machines door will not open / the door can be opened but water remains inside the drum. Advice: Please check for blockages in your pump filter (if applicable to model – please see user handbook).

What does F5 mean on washing machine?

The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range. The F5 error is normally caused by a failed NTC temperature sensor.

How do I fix error code F05 Indesit washing machine?

Indesit error F05 or F11

1. Prepare a towel or a bucket.
2. On the front side of the machine, open the hatch in front of the drain filter and unscrew the filter.
3. Drain the excess water and collect it.
4. Check if there’s a pin, coin or button in the drain and remove it.
5. Clean and replace the drain filter.

What does F18 mean on a washing machine?

Washing machine troubleshooting: error codes E18 or F18 These error codes indicate the pump time has exceeded its limits. Why am I getting this washing machine error code? This could happen for several reasons: blockage inside the filter, blockage inside the draining hose or a problem with the pump.

What does F05 mean on a Hotpoint washing machine?

The F05 fault code means that you Hotpoint machine’s pressure switch is experiencing problems. Particularly, it is a kind of telling the machine not to spin because it is full of water, although is actually not.

What do the error codes on my Hotpoint washing machine mean?

Error codes on Hotpoint washing machines run from F01 to F18 and each code means something different – allowing you to know exactly what the problem is with your machine. Here’s a brief rundown of what each code means: F01 – A fault with the electronic circuit board

What does the error F05 mean on a pressure washer?

So it waits for a signal from the pressure system so that it knows it’s safe to spin. The error F05 indicates that for various possible reasons it’s not getting that signal. This error can be caused by a pump fault or blockage in the filter.