What gap do I need around a wood burner?
Starting from the ground up, you will need to place your stove on a non-combustible hearth, be it stone or toughened glass, with a minimum thickness of 12mm. In terms of the distance between the stove’s external surfaces and surrounding walls, the minimum to the rear and sides is 150mm.
How much space do I need around my stove?
A minimum of 150mm (6”) is required above the stove (500mm if there is a wooden mantel/beam) and 100mm (4”) either side. However, the more space you have around the stove, the more effectively it will heat the room.
How much clearance do you need in front of a wood stove?
Floor protection should extend a minimum of 12 inches from the sides of the stove and a minimum of 18 inches from the front. If you have a side-loading stove, the floor protection should extend 18 inches on that side. Those clearances should be enough to protect you from sparks and embers.
Can you put a wood burning stove against a wall?
Wood stoves are commonly placed up against a wall in home, and so what should be put behind a wood burning stove? Any materials placed behind a wood burning stove should be fire resistant and must meet offset distances in line with your local and/or national building regulations.
Do you need a certificate for a wood burner?
YES: Simply ask for a copy of the certificate of compliance. This usually has a small cost involved. This will confirm the installation is compliant. If you are still uncomfortable, you can contact a local HETAS installer to inspect the works and advise you.
What is considered a non-combustible wall?
Examples of non-combustible materials include: a. Portland cement concrete, gypsum concrete (normally used in drywall or poured gypsum floor toppings), or magnesite (magnesium oxide) concrete having aggregates of sand, gravel, expanded vermiculite, expanded or vesicular slags, diatomaceous silica, perlite, or pumice.
What are the regulations for installing a wood burner?
Log Burner Hearth Regulations If the heat from the stove doesn’t raise the temperature of the hearth above 100°C, the following measurements must be met: The hearth must extend at least 300mm to the front and 150mm to either side. The full area of the hearth should be at least 840x840mm. It must be at least 12mm thick.
How big of a space do you need for a wood stove?
The one-inch spacers must be of a non-combustible material. In addition, a 1 1/3 inch or wider air gap is needed at the bottom of the asbestos millboard or metal panel. Circulating air will cool the panel and wall behind it (Figure 1). At least 36 inches of clearance must be allowed between the top of a stove and an unprotected ceiling.
Can a wood stove be placed on a wall?
The Wood Heat Organization recommends setting the floor pad so that it’s flush with the surrounding flooring — you don’t want to remove a fire hazard but create a tripping hazard. If your walls are combustible, you can install a shield on a wall to reduce the stove’s clearance area.
How to determine the right clearance for a wood stove?
How to determine the right clearance and how to reduce it safely 1 Clearances for an uncertified stove. The clearance for an uncertified radiant stove is 1200 mm (48 in.) and for a stove with a sheet metal jacket or casing the clearance 2 Reducing Minimum Clearances Safely. 3 Shield Construction Rules. 4 Protection for the Floor. …
What kind of air gap do you need for wood stove?
A 1-inch or wider air gap between the wall and the asbestos millboard or metal panel must be provided. The one-inch spacers must be of a non-combustible material. In addition, a 1 1/3 inch or wider air gap is needed at the bottom of the asbestos millboard or metal panel. Circulating air will cool the panel and wall behind it (Figure 1).
The one-inch spacers must be of a non-combustible material. In addition, a 1 1/3 inch or wider air gap is needed at the bottom of the asbestos millboard or metal panel. Circulating air will cool the panel and wall behind it (Figure 1). At least 36 inches of clearance must be allowed between the top of a stove and an unprotected ceiling.
What kind of wall protection do you need for a wood stove?
Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall. This distance may be reduced considerably if asbestos millboard and/or 28 gage sheet metal is used for wall protection.
Where do you put a wood burning stove?
Your stove manufacturer will often give guidance on how far away the stove should be positioned from combustible materials to the front, back and side. This information can usually be found on the back of the appliance and in the stove manual.
What kind of fire clearance do you need for a woodstove?
Some basic rule of thumb fire clearances for woodstoves are shown in the sketch at left. (Click to enlarge the image). Watch out : Check with your local fire marshall about local building code requirements for fire-clearance distances before installing and using a wood stove, coal stove, or other auxiliary heat source.
